How Safe is a Hydraulic Work Platform?

If you have ever visited a construction site or the site of any industry or factory, you must have come across a hydraulic work platform. The hydraulic work platform is a device which is commonly used to lift heavy goods from a lower to a higher level or vice versa.

Such heavy goods cannot obviously be transported manually since it poses certain threats. On the other hand, these work platforms make it a hundred times easier to carry out such functions. These work platforms are often referred to as aerial lifts in common parlance on construction sites.

Hydraulic-Work-Platform

Now there are a few reasons why these work platforms are immensely popular. One of the main reasons is safety. The hydraulic work platform manufacturers make it a point to use only the very best technology to make sure they are durable enough and offer adequate protection to the users. There are various kinds of controls, backup systems and even slip resistant surfaces which can help prevent deadly accidents. Construction or industrial labourers have some of the most dangerous and hazardous jobs on the planet.

These hydraulic work platforms simply make it a tad bit easier for them. Also, a hydraulic work platform comes with emergency descent and rescue which can come in handy in emergency situations or if the machines malfunction. Thus, it is important to go for machines which guarantee safety and better measures in the case of unforeseen situations.

Have you been trying to get your hands on hydraulic work platforms? Then you cannot afford to miss out on Essem Engineers. As hydraulic work platform manufacturers, we can assure you that we only deal in the best machinery and that you won’t be disappointed. Drop us a note to inquire about hydraulic scissor lifts @ [email protected].

What are Scissor Lifts ?

A scissor lift is defined as “a surface raised or lowered by the closing or opening of crossed supports pivoted like the two halves of a pair of scissors.”

Scissor lifts are popularly used in a lot of industries to reach high areas of work and also to lift or lower load. It has arms that open and close like scissors to raise and lower the height of the platform that is fixed on the top of the unit. This helps in adjusting the height of the platform according to one’s requirement.

Scissor lift is of three types, namely:

1) Hydraulic Scissor Lift

2) Mechanical Scissor Lift

3) Pneumatic Scissor Lift

The hydraulically powered units are the most popularly used machineries that can withstand huge amount of weight. These use pressurized hydraulic oil that is pumped into the machinery to make it function; that is to extend and contract its arms.These can reach up to great heights. However, care should be taken that such units have railings on the work platform to prevent workers from falling.

A hydraulic scissor lift can be easily fitted with a work platform of the user’s choice. These units can also be fitted with wheels to make moving them from one place to another easier.

The scissor lift platform is lifted upwards from the ground as soon as the arms of the Hydraulic Scissor Lifts are extended. They can reach upto a height of 20 – 60 feet, and can carry a load of upto 10,000 pounds.

 

Hydraulic Scissor Lift Table

 

Among the umpteen hydraulic scissor lifts manufacturers in Delhi, Essem Engineers is a leading name. Fulfilling the varying demands of customers, Essem is always occupied with offering a quality range of hydraulic scissor lifts.

As manufacturers, they use raw materials of a premium quality and carry out extensive research and development operations for an efficient designing of products.

Hydraulic Car Lifts

 The following salient features can be distinguished in Essem Engineers’s scissor lifts:

* Longer operational life

* Robust construction

* Precise design and high efficiency

* Lifts designed to provide superior control

* Control panel fitted for precision process handling

The scissor lifts are widely used at construction sites, railway sites, warehouses, godowns and large industries etc. Where there are heavy loads to be lifted from the ground and are to be kept at elevated heights. These machines help in reducing the workload of the workers and can be operated just by clicking a button or pressing the pump with the foot.

dfsfdsfd

Proper care should be taken while functioning the machinery. The point to be remembered always is that the machine is powered by oil. This oil becomes more fluid in summers and so the unit runs a bit faster in this season.

Proper working condidtions should also be maintained for ideal working environment for the machines and the workers. Hence knowledge and experience of handling such equipments and machinery is important.

Therefore whether it is the Hydraulic Scissor Lift Table, or the Hydraulic Elevator or the Cantilever Lift or the Hydraulic Car Lift among many others, Essem Engineers can be contacted for providing any of the scissor lift variety. They are available at their e-mail id and also at their contact numbers mentiomed on their website. Drop in a quick mail and we will be there to assist you with your requirements and to update you with our offerings.

Know your hydraulic system machinery

Hydraulic system machinery has been defined as ‘a power transmission system that uses the force of flowing liquids to transmit power’.

The hydraulic fluid in these machines flows to all the hydraulic motors and cylinders and these become pressurized. The fluid is controlled by control valves that distribute it in the machinery through hoses and tubes. The path in which the fluid flows in called the hydraulic circuit. This is of two types:

  1. Open center circuit:
  2. Closed center circuit:

 Hydraulic system manufacturers make a variety of machinery that are widely used in different industries. Hydraulic press, motors, hammers, jack, breakers, pipe benders, robots, chainsaws, etc. are a few types of popularly used machinery.

Advantages and disadvantages of hydraulic system machinery

Advantages

  • Output force can be adjusted with the help of valves that are used to adjust pressure.
  • Unlike the electric motor, this machinery can be instantly reversed when in full motion without causing any damage. Electric motors on the other hand need to be first stopped before reversing.
  • Vibration in these type of machinery is minimum. And so, the start and stop motion of these units is smooth.
  • There is less loss due to friction and therefore high efficiency.

Disadvantages

  • Initial cost is high. However, it is made up for by the high efficiency of the machinery in the long run.
  • Oil leakage might occur and it is hazardous. Therefore regular maintenance checks are very important.
  • Filtration system is required to keep oil clean so that there is no clogging and the machine runs smoothly.

 

Essem Engineers are reputed hydraulic system manufacturers and suppliers in Delhi. They have a variety of hydraulically powered machinery that includes cylinders, PowerPacks AC/DC, presses and machines, interlocking paver press, scissor lifts, systems for water cannons, solid waste handling equipments, dock levelers, etc. Check out the Essem Engineers website for more details. 

What is a Hydraulic Scissor Lift?

The Oxford dictionary defines a scissor lift as “A surface raised or lowered by the closing or opening of crossed supports pivoted like the two halves of a pair of scissors.”

Scissor lifts are popularly used in a lot of industries to reach high areas of work and also to lift or lower load. It has arms that open and close like a scissors to raise and lower the height of the platform that is fixed on the top of the unit. This helps in adjusting the height of the platform according to one’s requirement.

A scissor lift can be of any of these three types:

Hydraulic Scissor Lift
Mechanical Scissor Lift
Pneumatic Scissor Lift

Hydraulically powered units are the most popularly used machinery as they can withstand huge amount of weight. These use pressurized hydraulic oil that is pumped in the machinery to make it function; that is to extend and contract its arms. These can reach up to great heights. However, care should be taken that such units have railings on the work platform to prevent workers from falling.

A hydraulic scissor lift can easily be fitted with a work platform of the user’s choice. These units can also be fitted with wheels to make moving them easier from one place to another. Hydraulic scissor lift manufacturers in Delhi provide custom made platforms to be fitted on the units for maximum functionality for the user.

Care and maintenance

Care should be taken while functioning the machinery. Always remember that the machine is powered by oil. This oil becomes more fluid in summers and so the unit runs a bit faster in this season.

Timely maintenance checks are necessary for long life of the machinery and safety of the users.

Hydraulic scissor lift manufacturers in Delhi provide a list of safety instruction. Always go through these in detail before operating the unit.