Welding Flange Construction Cylinder: A Popular Choice

The three major and most common types of cylinder configurations can be distinguished into ram-style, tie rod and welded cylinders.

As understood by the name, ram cylinders are utilized in heavy-duty applications. They are involved in pulling the load rather than pushing the load.

The tie-rods are typically situated on the outside housing of the cylinder to provide an extra stability.

Welding-Flange-Construction-Cylinder

The welding flange construction cylinder has end flanges that are welded onto the barrel and an end cap is attached with each flange. The end cap is secured in its place by bolts which slip through the holes in each of the end cap and thread into tapped holes in every end flange. This structure is more compact and lighter than the regular tie-rod configuration, and this explains why the welded cylinder finds wide application in varied mobile equipments.

A variant to this creation comprises each end cap that is threaded into the ending of the barrels. This construction, on the other hand, usually cannot hold as much of high pressure rating as held by welded cylinders and they are also more difficult to reassemble and disassemble.

There are many hydraulic cylinder manufacturers that manufacture a huge variety of hydraulic cylinders like trunions, telescopic and clevis etc.

Essem Engineers are known to be a huge name in the world of hydraulic cylinder manufacturers. The welding flange construction cylinders offered by them are without doubt flawless and work for long durations without any damage. As a result no repairing and servicing is required for a long time.

Multi – Stage Hydraulic Cylinders

The use of hydraulic power makes the difficult work smoother and easier. Attaining a specific degree of inclination can be difficult without proper instrumentation. A multilevel telescope cylinder makes this possible.

A telescopic hydraulic cylinder is used to achieve the inclination. These are primarily of two types, the single acting telescopic type, and the double acting telescopic cylinder type. Both of these are used in several areas.

Telescopic-Hydraulic-Cylinder

The most common example of the use of a telescopic cylinder is in a dump truck. In order to throw away the trash, the container part of the truck needs to be raised at an angle of about 60 degrees.

The multi-stage cylinder makes this task easy, as it can rise up to a certain percentage of its height. The system has stability due to the use of hydraulic fluids. For a lighter cylinder, compressed air control is used. The construction of these cylinders is very precise. Each stage is supported by at least 2 bearings such that proper rigidity is given when the cylinder rises.

Constructing a hydraulic cylinder is tricky considering its work of collapsing and expanding to 20 to 40 % of its height. A lot of expertise is required to bring out the best product. Essem Engineers are well known hydraulic cylinders manufacturers and have been in this industry for more than a decade. The manufacturing units are built according to the safety standards. For more info, you can drop a mail at [email protected].

Our Valued Trunnion Mounted Hydraulic Cylinders

Hydraulic cylinders are mechanical actuators that are used to offer a unidirectional force via a unidirectional stroke. They have many applications, particularly in construction equipment, civil engineering, and manufacturing machinery. They are the key hydraulic components.

The hydraulic cylinders convert the energy of the hydraulic liquids or fluids into such a power that is used to move a cylinder in motion. The hydraulic fluid serves as a force for these cylinders.

Trunnions, flanges, clevises, lugs are some of the widespread cylinder mounting options. The piston rods also have mountings attached with the cylinder to connect to the machine that it has to pull or push.

The hydraulic cylinders are the motor or the actuator side of this process. The generator side is the hydraulic pump, which helps in bringing a constant flow of the fluid or oil to the cylinder to move the piston.

Essem Engineers offers a wide range of trunnion mounted hydraulic cylinders. The cylinders are designed uniquely offering value and performance through advanced machinery.

The trunnion mounted hydraulic cylinders manufactured by Essem, have been made with machined hard stop to guarantee trustworthy stopping at end of each stroke. Also these hydraulic cylinders require lesser oil than the ones of its class that ultimately results in quicker cycle times and they can lift much more loads using the same pressure.

The trunnion mounted hydraulic cylinders are very compact in their construction and offer simple mounting to different system. The cylinders are highly functional, abrasion resistant, durable, and compact in their sizes. Essem’s trunnion mounting hydraulic cylinders are few of the most reliable and strongest products in the market.

Trunnion Mounted Hydraulic Cylinders

Let’s look at some of the salient features of these trunnion mounted cylinders.

Features & specifications:

Nominal pressure of 25, 0 MPA
Static test pressure of 28, 00 MPA
Mounting position is Optional
Stroking speed of 1, 0 m/s
Fluid temperature Ranges from 30 ° C – 100 ° C

Therefore, if in need of a high quality, long service life and durable trunnion mounted hydraulic cylinder, look no further. Essem Engineers is your one stop solution. Also known as the leading hydraulic cylinder manufacturer among the various hydraulic cylinders manufacturers in the market, Essem Engineers can provide innovative and technically sound solutions to client needs.

Flange Cylinder- Finest Configuration of Cylinder

The three major and most common types of cylinder configurations can be distinguished into ram-style, tie rod and welded cylinders.

As understood by the name, ram cylinders are utilized in heavy-duty applications. They are involved in pulling the load rather than pushing the load.

The tie-rods are typically situated on the outside housing of the cylinder to provide an extra stability.

The welding flange construction cylinder has end flanges that are welded onto the barrel and an end cap is attached with each flange. The end cap is secured in its place by bolts which slip through the holes in each of the end cap and thread into tapped holes in every end flange. This structure is more compact and lighter than the regular tie-rod configuration, and this explains why the welded cylinder finds wide applications in varied mobile equipments.

A variant to this creation comprises each end cap that is threaded into the ending of the barrels. This construction, on the other hand, usually cannot hold as much of high pressure rating as held by welded cylinders and they are also more difficult to reassemble and disassemble.

There are many hydraulic cylinder manufacturers that manufacture a huge variety of hydraulic cylinders like trunnions, telescopic and clevis, etc.

Essem Engineers are known to be a huge name in the world of hydraulic cylinder manufacturers. The welding flange construction cylinder offered by them are without doubt flawless and work for long durations without any damage. As a result no repairing and servicing is required for a long time.

Hydraulic Cylinder Machineries Made To Give Multidirectional Power

A hydraulic cylinder transfers the energy loaded in hydraulic fluids with a force which is used to shift the cylinder in a particular direction.

Hydraulic Cylinders, also known as Cylinder Jacks are normally used in a wide range of lifting as well as pushing applications in moving industries.

Process of Hydraulic Cylinders:

The hydraulic cylinders are machineries that are made to give multi-directional power with the help of unidirectional strokes. These are widely utilized in engineering for industrial purposes. The hydraulic cylinder manufacturers supply these products to be fitted in trunnion mounted hydraulic cylinders which are highly utilized in the manufacturing of heavy industrial products.

Following is the Classification of Hydraulic Cylinders

  1. Single –Acting Cylinders

In these cylinders, the liquid is under pressure in only one side of the cylinder. All through the retraction and the expansion process, the liquid is under pressure.

2. Double-Acting Cylinders

In such cylinders, pressure on the fluid is convenient in both the directions.

Following are the Parts of the Hydraulic Cylinders:

Considerably, various components of the hydraulic cylinders are cylinder barrels, cylinder head, cylinder bottom and cylinder bottom connections. They are also made up of piston rods, pistons and the piston connecting rod. Some hydraulic cylinders might comprise the feet also. It is used to mount the barrel.

Essem Engineers are eminent hydraulic cylinder manufacturers and also make trunnion mounted hydraulic cylinders in India, and provide a varied range of hydraulic equipments for their clients. Basically the Hydraulic Cylinders are involved in various lifting jobs. We manufacture these cylinders in accordance with the set industrial standards.